Sitrak diagnostics — MC11, MC13 fault codes

Sitrak C7H/C9H are Sinotruk highway tractors next to Howo T7H. Engines MC11, MC13, WP13. Same SAE/J1939 family, Sitrak loom and cluster. Use Sitrak C7H or C9H on the form.

Engines

MC11/MC13 are MAN-layout rails with VGT and EGR/DPF on Euro-5. WP13 is the same Weichai as Howo T7H. P0299, rail, CKP, U0100 are the daily codes.

Symptoms

• no pull with a spinning turbo — intercooler;
• no start — CKP/ECM power;
• derate after MIL;
• lost engine on the scanner.

Frequent Sitrak codes

• P0087 — low common-rail pressure
• P0088 — high common-rail pressure
• P1011 — HP pump metering valve fault
• P0093 — large fuel leak / CAN trap — FMI needed
• P0193 — rail pressure sensor high signal
• P0299 — boost below target
• P2263 — turbo / boost performance
• P2563 — VGT position sensor — range / performance
• P0335 — crankshaft sensor no signal
• P0340 — camshaft sensor (CMP) — FMI needed
• P0401 — EGR insufficient flow
• U0100 — lost communication with engine ECU
• U0101 — lost communication with TCM
• U0155 — lost communication with instrument cluster
• P0562 — system voltage low
• P0201 — cylinder 1 injector circuit
• P0480 — fan control circuit
• P0217 — engine overheat
• P0116 — water in fuel (Weichai table) / not always coolant SAE
• P2509 — intermittent ECM power (no OEM in DB)
• SPN 2898 — without FMI — not a diagnosis (config / Weichai grid)
• SPN 729 — intake heater — FMI needed

Type SPN/FMI as on the screen. Neighbours: Howo, Shacman, Weichai.

Fault code table

Sitrak C7H/C9H codes: MC11/MC13, Weichai and Knorr EBS. Without FMI on SPN the diagnosis is incomplete.

Full step-by-step — enter the code on the home page. If a card exists, click the code.

Look up the code in the service